The maintenance and maintenance of the ball valve need to pay attention to the following points:
Keep valves clean
Regularly remove the dirt and dust on the valve. Especially the sealing part, and check and clean regularly to ensure that the sealing surface is clean.
Check sealing performance
Check the sealing performance of the copper ball valve regularly to ensure that there is no leakage when the valve is closed. If leakage is found, it should be dealt with in time.
Periodic lubrication
For the copper ball valve that needs to be lubricated, regularly fill lubricating oil or grease to ensure that its rotation is flexible.
Periodic inspection
Check the copper ball valve regularly, including whether the opening and closing of the valve is smooth, and whether the packing is tight.
Corrosion protection
For exposed copper ball valves, anti-corrosion protection should be carried out, such as coating anti-rust paint.
Avoid long-term storage
If the copper ball valve is not used for a long time, it should be stored in a dry and well-ventilated place to avoid moisture and corrosion.
Replace wearing parts
For the wearing parts of the copper ball valve, such as the sealing ring. it should be replaced regularly to ensure its normal operation.
Maintenance personnel must have the required skills and knowledge
The maintenance and maintenance of copper ball valves requires certain skills and knowledge, and should be carried out by professionals or under their guidance.
Follow operating procedures
When operating the copper ball valve, the operating procedures should be followed to avoid valve damage due to improper operation.
The above information is for reference only, if necessary. It is recommended to consult the supplier or relevant technical personnel of the copper ball valve to obtain more accurate guidance.
If you have read this article and have any questions, please feel free to contact IFAN. Below is our contact information:
Whatsapp:+86 13373827623
Email：[email protected]
